JB HiFi Brisbane Central

JB HiFi Brisbane Central 

JB HiFi Brisbane Central was a split level project performed over a 8 week programmed fit out.

This job was a little different from the others due to the 1000m2 of polished feature ply flooring to be used.

Polishing of the ply was done all in house using a 4 coat system. We designed special racks for drying the ply due to the 370 sheets that had to be polished. Each sheet had to be machined for a tong and groove floor laying system.

As well as the the tong and groove machining, we programmed our CNC nesting machine to pre drill all counter sunk holes to accept the architectural fixing system required. These CNC machines are a must have in the shopfitting industry to reduce material costs and furthermore, a reduction in labour costs. We pride ourselves in having the latest machinery and also have the best software packages to run all machines. This when combined is a major cost saving that can be passed on to all customers.

The flooring was then layed over a plastic membrane to prevent moisture from the existing slab penetrating the board and causing swelling (which then proceeds to floor expansion).

Retailers must be able to rely on our shopfitting experience to prevent major problems becoming issues after the shop is up and trading. Again this job when finished gave us much pride and satisfaction for the amount of work and pre planning that goes hand in hand with every fit out we provide.

Services provided by RJR Shopfitting: 

  • Structural steel manufacturing
  • Electrical
  • Data
  • Painters
  • Air conditioning
  • Security
  • Plasterers
  • Suspended ceilings
  • Flooring
  • Signage
  • Fire services
  • Glazing